Venue Lighting Effects LED PAR 38 User Manual Download Page 7

www.venuelightingeffects.com

TROUBLE SHOOTING

Unit not responding to DMX:
1. Check that the DMX cables are connected and wired correctly (pin 3 is ‘hot’; on some other DMX devices pin 2 may be 
‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs 
are connected.

Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.

SPECIFICATIONS

Please Note: Specifications and 
improvements in the design of this  
unit and this manual are subject  
to change without any prior  
written notice.

WARRANTY

One (1) Year Limited Warranty
Subject to the limitations set forth below, Venue™ hereby represents and warrants that the components of this product 
shall be free from defects in workmanship and materials, including implied warranties of merchantability or fitness for a 
particular purpose, subject to normal use and service, for one (1) year (ninety (90) days on lamps) to the original owner 
from the date of purchase.

Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of  
time, interrupted operation or commercial loss or any other incidental or consequential damages including but not limited 
to lost profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, 
reprogramming, or reproducing any program or data stored in equipment that is used with Venue™ products. This  
guarantee gives you specific legal rights. You may have other legal rights which vary from state to state. Some states  
do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Venue Lighting Effects 
P.O. Box 5111
Thousand Oaks, CA 91359-5111
www.venuelightingeffects.com

All trademarks and registered trademarks mentioned herein are recognized as the property of their  
respective holders. Made in China 

 

 

 

 

                     0804-8099A

  

Model:  LED PAR 38

   

SPECIFICATIONS:

 
   Working Position:  

Any safe working position

   Voltage:  

 

120V

   Power Draw:   

0.2 Amps

  Weight:   

 

3.5 lbs./1.6 kg.

   Dimensions:    

(L) 8.75” x (W) 6.75” x (H) 6.5”

   Colors: 

 

RGB Color Mixing

Page 7

Summary of Contents for LED PAR 38









Reviews: