Venturo ET36KXX, Owner'S Manual

Page: 5 / 60

TVQFSDFEFT
UJUMF EBUF
TFDUJPO
DJODJOOBUJ, PIJP
NGH., JOD.
21078
D120
-
3-18-08
JOTUBMMBUJPO EXH
FU36LY-10/20
PWFSMPBE TFOTJOH TZTUFN
This crane is equipped with an Overload Sensing System- If the capacity of the crane is e
the !Winch Up!+ !Boom Down!+ and !Boom Out! functions will be shut down- The !Winch Down!+
!Boom Up!+ and !Boom In! functions will continue to operate and can be used to relieve the overload
condition- The !Rotation! function also will continue to operate-
DPOUSPM QSJPSJUZ TZTUFN
The design intent of the electrical and hydraulic system is such that some functions can be operated
simulta while others are meant to be operated individually- To summarize the control
system see the explanations below-
, Winch up takes priority over all functions-
, Winch Down can be operated with any other single function-
, Hydraulic functions 'Rotation Right+ Rotation Left+ Boom Up+ Boom Down+ Boom Out and Boom
In( are designed to function one at a time-
DBCMF ESVN BOE TIFBWF EJBNFUFST
The drum on the ET25KX is 4,4.05! in diameter which provides the first layer wire rope pitch
diameter 07 times the rope diameter as required by ANSI B2/-4 Hydraulic Crane Standards- The
cable sheaves are either 05 'snatch block( or 07 'boom( times the cable diameter which likewise
conforms-
NJTDFMMBOFPVT
A- CAPACITY INDICATOR
Select boom reach and angle allowable for load by using capacity indicator arrow and chart on
either side of boom-
B- BATTERY HOOKUP
A parallel auxiliary battery should be installed near the crane as shown on Dwg- 08836 under
!RECOMMENDED INSTALLATION!- The parallel auxiliary battery minimum rating should be 34/
Cold Cranking Amps 'at /° F( and 0// reserve c or 67 plates and 6/ amp hours-