29
LiSTENiNG TO THE RADiO
Presetting Stations
The unit can store a total of 60 stations in memory (30 FM, 30 AM). Presetting allows you to tune in to a
station directly.
Tuning in to a Station manually
1. Press the
DVD/TV/RADiO
button (the
fUNCTiON
button on the remote
control) until the radio frequency appears on the front panel display.
2. Press the
/AM/fM
button to select AM or FM.
3. Press the
TUNiNG
buttons on the remote control to tune in to
a desired station.
1. Press the
DVD/TV/RADiO
button (the
fUNCTiON
button on the remote control) to RADIO.
2. Press the
/AM/fM
button to select AM or FM.
3. Press the number button on the remote control to select the preset number.
Tuning in to a Preset Station
1. Press the
DVD/TV/RADiO
button (the
fUNCTiON
button on the remote control) to RADIO.
2. Press the
/AM/fM
button to select AM or FM.
3. Press the
PREV/
NEXT
button repeatedly to select the number of the preset station or use the
numeric buttons to enter the number of the preset station.
Searching for a Station Automatically
• Press and hold the
CH
/
CH
button on the front panel or the
TUNiNG
buttons on
the remote control until the tuner starts searching for a station, then release. After tuning in a station, the
search stops.
• The search may not stop at a station with a very weak signal.
4. Press the
TUNiNG
buttons to tune in to a desired station.
5. Press the
MEMORy
button twice on the remote control.
6. Repeat steps 2-5 to store other stations.
Fm Stereo
Press the
MTS
button on the remote control until “ ” appears on the
front panel display.
Weak Fm stations
Press the
MTS
button on the remote control until “
” appears on the
front panel display. Background noise will be reduced. To restore stereo
reception, press the
MTS
button on the remote control to select “ ”.
• For preset numbers 1 to 9, simply press the number button on the remote control.
• For preset numbers 10 to 30, enter the two-digit numbers.
For example, to enter 18 by pressing “1” & “8”.
• When
MUTE
is pressed, the sound is mute and the “
L O
” indicator
always blinks on the LCD display until
MUTE
is pressed again or
VOL
is pressed.
For Better Reception
FM: Fully unwind the FM antenna wire. Then extend the FM antenna wire and place it in the position that
sounds best.
AM: Fully unwind and rotate the loop antenna then position it for the best reception.
NOTE
: Do not connect the FM antenna to an outside antenna.
KLV39123 Eng IB Generic.indd 30
8/11/2009 9:33:19 AM
