4
2
. Charging the Built-in Battery of this Product
Connect the DC IN connector (USB micro B connector)
on the rear panel of this product and your computer or
the USB charging adapter supplied with iPod/iPhone by
using the supplied USB cable.
The built-in battery is charged by setting the toggle switch
on the front panel to "
" or "
".
During charging, the charging indicator LED
located
on the side panel will light up.
* When the built-in battery of this product has been fully
charged, it will automatically start charging iPod/iPhone. It takes
approximately 5 hours to fully charge this product.
* The CHARGE LEDs turn off when the USB cable is disconnected.
1
2
Charging status indicator
Charging status
LED
Pre charge
○
●
Charge
○
Complete
●
LED color
○
: Orange
●
: Green
CAUTION
If both LEDs are off or become off when the USB cable
is connected, immediately disconnect the USB cable
and stop charging.
Please refer to "Troubleshooting" on page seven of this
document and use after resetting.
DC IN
