page 4
tel. (0-22) 7519550; 7512031, fax (0-22) 7512259; 7511202, e-mail: [email protected]
3. INSTALLATION
The delivered system is ready for use. All you need to do is do the following:
- connect power contactors supplying the fan in accordance with a diagram,
- connect the power supply (according to the provided diagram),
- set the sensor's vibration thresholds.
The device may only be installed by qualified and authorized personnel (with appropriate
qualifications), in accordance with health and safety rules, relevant legal regulations in
force in Poland and the instruction manual of the device.
The cable from the sensor should be placed in such a way that it will not be exposed to
mechanical damage.
A. Mounting the sensor
Mounting the sensor is done by screwing to the appropriate surface with the M8 screw. The
housing cover should be tightened with a torque wrench.
Fig. 1 (sensor connection)
B. Connecting the power supply
Fig. 2 (Some of the electrical documentation)
ATTENTION!
Although the overcurrent switch is turned off, there may still be voltage in the
cabinet.
