Venture Global MA-3000Ck, User Manual, Page: 2 / 4

Parts and Function
Setting
Batt. Low
Icon Pate
(replaceable)
LED
Dispaly
Speaker
Alarm Indicator
AC power
indicator
Cover
On
Off
3S
15S
On
Off
On
Off
On
Off
Auto
Manu
AL1 Timer Vib
AL2 Light Dimmer
Tone
Volume
Mode/Setting
Button
Confirm Button
Down Botton
Up Botton
Beep Sound Tone
Function On/Off
Switch
Volume Control
Flasher
Ext.
Trigger
Alarm
Out 5V Out
Vib
Out
12V
DC In
Dimmer Calendar
Snooze/Stop
DC 12V In
Vibration Out
Alarm Audio
Out
External
Trigger In
USB
Charger (out)
Calendar
Snooze/Stop
Dimmer
12V Out &
NC/No Relay Out
Battery
Cover
NO
NC
+12V-
SET Calendar (Set Cal)
Press Mode button once, The display show Set Cal .
Press confirm button to set calendar year. Press Up / Down button adjust the year, the year "up to
2099
Press confirm button to set calendar month. Press Up / Down button adjust the month. Press
confirm button to set calendar date.
Press confirm button to finishing and exit the calendar setting.
SET Clock (Set Ck)
The time display will blinking when install batteries and connect to ac power. Please adjust the clock to keep
the time is correct.
Press Mode button twice, The display show
Set Ck .
Press confirm button to set time format 12 /24 hour. Press Up / Down button select the 12 or 24
hour format.
Press confirm button jump to set minute. Press Up / Down button adjust the minute. Press
confirm button to set hour. Press Up/ Down button adjust the Hour.
Press confirm button to finishing and exit the time setting mode.
*** Each time you press the confirm button, the time second will reset to zero. (The clock will run from
zero second after you set the clock.)
SET Alarm Time (Set A1 or A2)
Press Mode button three or four time, The display show Set A1 or A2 .
Press confirm button to set alarm minute. Press Up / Down button to adjust the alarm minute.
Press confirm button to set alarm hour. Press Up / Down button to adjust the alarm hour.
Press confirm button to set alarm melody. Press Up / Down button to select the alarm melody.
Press confirm button to set vibration on or off. Press Up to turn on the vibrator. Press down to
turn off vibrator.
Press confirm button to set 12V output on or off. Press Up to turn on the 12V output. Press down
to turn off vibrator the 12V output.
Press confirm button to set relay output on or off. Press Up to turn on the relay output. Press down
to turn off vibrator the relay output.
Press confirm button to finishing and exit the time setting mode.
Please do not forget turn the alarm switch inside the front cover.
Matching (Pair)
Press Mode button five time, The display show Pair
Press confirm button to entering to pair mode. the
display show Zone: -1 or Zone:1
Zone 1 = Zone 1 is empty; Zone: 1 = Zone 1 is already
paired with the sensor, and if it continues, the new sensor
will replace the old one.
Press up or down button to select the zone you want to
pair.
Trigger the transmitter/sensor you want to pair. The display
will show linked when the pair is success. then the receiver
show the sensor name, Press confirm
button to confirm
or press up /down button to select an other sensor
name.
If it do not show “linked” information, it show other zone
number when trigger the sensor. This sensor is already paired
in other zone.
Please ensures the sound volume is not on the min position before setting.
SENSOR NAME Defult Option Option
Door Bell Bell D. Bell Knock
Door/window Sensor Window Door Invade
Mailbox Sensor Mail M. Box Letter
Fall sensor Fall Al Pad Help
Flood detector Flood Empty Full
Toilet pull sensor Toilet Help Slip
Magnet sensor Magnet Steal Lost
Entry mat Mat Escape Enter
PIR/Driveway sensor PIR Road Invade
Sound sensor Baby Cry Sound
Telephone ring transmitter Phone Ring Call
Garage door Garage Open G.Door
Gas detector Gas Danger Alarm
T3 Smoke Danger Fire
T4 CO Danger Fire
Power
Battery Low
The receiver powered by a 12V 1.2A AC/DC adaptor and backup by 3 pieces ‘C’ size batteries.
Install the backup batteries avoid lost alert information when ac power fail. The AC power indicator
will lit when the ac power is good.
Ext.
Trigger
Alarm
Out 5V Out
Vib
Out
12V
DC In
Dimmer Calendar
Snooze/Stop
12V/
1.2A
.
Receiver unit:
When the backup batteries are low voltage, the low battery information “ BattLo ” will show on the display for 1
second every 15 seconds. Replace the batteries as soon as possible.
Sensor unit
When the battery of the sensor/Bell pusher is low voltage. It will send a battery low information with the trigger
signal to the receiver. The receiver will blink the zone icon to indicate this sensor battery is low voltage. Replace
the battery as soon as possible.
** The display time will blink, when the AC power and the backup batteries are lost before. Press the reset
button to stop blinking. (The clock will run with the internal CR2032 battery. Power loss will not affect clock
accuracy)
** If ac power is fail, the USB charger, Vibration pad, and 12V output will not work.
The connect is Inside the
battery cover
Then display will show the melody . Press confirm button to confirm the default melody or press up /
down button to select an other melody. (each type of sensor have a default melody)
The melody number from 00 to 32, The #32 is a beep tone , you can adjust the tone lever to change the pitch
of the sound.
*** Select ‘None’ to mute this sensor
SENSOR NAME
Defult
Sound# SENSOR NAME Defult
Sound# SENSOR NAME Defult
Sound# SENSOR NAME Defult
Sound#
Door Bell 1 Flood detector 14 PIR/Driveway sensor 13 Gas detector 10
Door/window Sensor 28 Toilet pull sensor 27 Sound sensor 31 T3 13
Mailbox Sensor 12 Magnet sensor 17 Phone Ring 19 T4 13
Fall sensor 29 Entry mat 15 Garage door 6
Open the battery cover
to install the batteries.
Connect the power adaptor
1 2
RECEIVER