24
VUT .. WH ЕС
1. ON/OFF button;
2. Not applied;
3. Fan speed (auto/high/med/low);
4. Day/night mode;
5. Supply air temperature setting up;
6. Supply air temperature setting down;
7. Temperature output signal indicator;
8. Temperature output signal value;
9. Supply air temperature setting indication;
10. Temperature measuring unit;
11 Day / night indication;
12. Fan speed indication;
13. Motion sensor condition (if connected);
14. Indoor temperature displaying.
To turn the unit on/off press the button 1 on the control panel, fig. 14. To set the required air
capacity (LOW, MED, HIGH or AUTO) press consecutively the button 3, see fig. 14. The speed settings
are displayed on the control panel. The day/night mode switch is set by the button 4 while holding
it within 3 seconds. In night mode the minimum supply air temperature is maintained as set from
the service menu from +18°C to +25°C in one fan operation mode. The set mode is displayed on the
control panel 11. Supply temperature level is set by means of the buttons 5 and 6 and the online
supply temperature setting is also displayed on the control panel 9.
Fig. 14. Remote control panel
Remote control panel
The unit is equipped with a remote control panel that has the following functions:
Turning the unit on/off from the control panel;
Setting required air capacity (auto/high/med/low);
Setting supply air temperature;
Displaying indoor temperature;
Day/Night mode switching on/off.
