background image

4

VUT 160/250/350 PB EC L/R A11/A14

www.ventilation-system.com

VUT 160/250/350 PB EC L/R A11

VUT 160/250/350 PB EC L/R A14

Name

Number

Name

Number

Air handling unit

1 pc.

Air handling unit

1 pc.

User's manual

1 pc.

User’s manual

1 pc.

Control panel

1 pc.

Control panel

1 pc.

Control panel user's manual

1 pc.

Mounting box for wall flush mounting

1 pc.

Packing box

1 pc.

Mounting box for wall surface mounting

1 pc.

Fastening kit

1 pc.

Packing box

1 pc.

VUT X P B EC

L A14

Automation type

 (control panel type)

Service side

L - left service side 
R - right service side 

Motor type

EC – electronically commutated

Additional components

B – bypass

Spigot orientation

P – suspended mounting, horizontal spigot 
orientation

Rated air flow [m

3

/h]

Unit type

VUT – heat recovery air handling unit

DESIGNATION KEY

The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafés, conference halls, and other utility 
and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream 
of supply air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with 
high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises. 
The unit is a component part and is not designed for stand-alone operation. 

It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, 
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, 
pathogenic germs). 
Relative humidity of transported air must not exceed 80 % at an ambient temperature of +20 °C.

THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED 

PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT 

THE APPROPRIATE TRAINING. 

THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED 

PERSONNEL AFTER THE APPROPRIATE BRIEFING.

THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED 

ACCESS BY UNATTENDED CHILDREN.

PURPOSE

DELIVERY SET

Summary of Contents for VUT 160 PB EC L A11





















Reviews: