www.ventilation-system.com
10
CONTROL PANEL MOUNTING
MAKE SURE THAT THE CONTROL PANEL IS NOT DAMAGED. DO NOT USE A DAMAGED
CONTROL PANEL! DO NOT INSTALL THE CONTROL PANEL ON AN UNEVEN SURFACE! WHILE
TIGHTENING THE SCREWS, DO NOT APPLY EXCESSIVE FORCE TO PREVENT THE CONTROL
PANEL CASING DEFORMATION.
Control panel wall flush mounting
1. Prepare a hole in the wall and route
all the wires to the installation place.
Insert the supplied mounting box for
flush wall mounting.
The mounting box is included in
delivery.
2. Use a screwdriver to carefully undo
the clips on the bottom edge of the
control panel and remove the back
cover.
3. Screw the backside of the casing
to the mounting box through the
fastening holes. Fastening screws for
mounting of the control panel are
included in the control panel delivery
set. Then connect the cable to the
control panel in compliance with
external wiring diagram.
4. Install the control panel display and
press it to fix.
Control panel wall surface mounting:
1. Route the required wires and cables
to the control panel installation place.
Drill the fastening holes in the wall
and screw the mounting box. The
mounting box is included in the
scope of delivery. Fastening screws
for fixation of the mounting box are
available separately.
2. Use a screwdriver to carefully undo
the clips on the bottom edge of the
control panel and remove the back
cover.
3. Screw the backside of the casing
to the mounting box through the
fastening holes. Fastening screws for
mounting of the control panel are
included in the control panel delivery
set. Then connect the cable to the
control panel in compliance with
external wiring diagram.
4. Install the control panel display and
press it to fix.
V146EN_01.indd 10
22.03.2017 10:30:53