www.ventilation-system.com
9
Mounting steps for the HV2 humidity sensor (for the ventilation units with A14 control panel):
•
Remove the screws that retain the panel on side of the extract spigot and remove it.
•
Insert the humidity sensor on the mount.
•
Connect the humidity sensor contact socket to the contact socket with a cable from the control unit. The contact socket is pre-
wired.
Вытяжной
патрубок
SERVICE SIDE CHANGE
•
Unscrew the front panel on the service side and the back panel.
•
Remove the panels and change their positions. Fix the panels with screws.
Note: the service panel change is shown for VUT/VUE 250 V(B) EC.
Summary of Contents for VUE 200 B EC
Page 20: ...V106 5EN 01 ...