background image

15

www.ventilation-system.com

Unit Type

Single-room reversible energy recovery ventilator

Seller’s Stamp

Model

Solo RA1- ___________________

Serial Number
Manufacture Date
Purchase Date
Warranty Period

Seller

Unit Type

Single-room reversible energy recovery ventilator

Model

Solo RA1- ___________________

Serial Number
Manufacture Date

Quality Inspector’s

Stamp

Seller

Seller’s Stamp

Address
Phone Number
E-mail
Purchase Date

This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are 
acknowledged and accepted.

Customer’s Signature

The Solo RA1- ___________________ unit has been connected to power mains pursuant to the 
requirements stated in the present user’s manual.

Installation Company Stamp

Seller
Address
Phone Number
Installation

Technician’s Full Name
Installation Date:

Signature:

The unit has been installed in accordance with the provisions of all the applicable local and national construction, 
electrical and technical codes and standards. The unit operates normally as intended by the manufacturer.

Signature:

CERTIFICATE oF ACCEPTANCE

SEllER INFoRMATIoN

INSTAllATIoN CERTIFICATE

WARRANTY CARD

Summary of Contents for Solo RA1-35-9 P

















Reviews: