Vents RNS-16, User Manual

Page: 3 / 24

3
This user’s manual consisting of the technical details, operating instructions and technical specification
covers the installation and mounting of the RNS triac power controller (hereinafter referred to as «the
controller» or «the unit» as mentioned in the «Safety requirements» and «Manufacturer’s warranty» sections
as well as in warnings and information blocks).
 SAFETY REQUIREMENTS
Read the user’s manual carefully prior to installing and operating the unit.
Fulfil the user’s manual requirements as well as the provisions of all the applicable
local and national construction, electrical and technical norms and standards.
The warnings contained in the user’s manual must be considered most seriously
since they contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user’s manual may
result in an injury or unit damage.
After a careful reading of the manual, keep it for the entire service life of the unit.
While transferring the unit control the user’s manual must be turned over to
the receiving operator.
Symbol legend:
WARNING!
DO NOT!
UNIT MOUNTING AND OPERATION SAFETY PRECAUTIONS
• Disconnect the unit from power
mains prior to any installation
operations.
• The unit must be grounded!
• Do not lay the power cable of
the unit in close proximity to
heating equipment.
• While installing the unit
follow the safety regulations
specific to the use of electric
tools.
• Do not change the power cable
length at your own discretion.
• Do not bend the power cable.
• Avoid damaging the power
cable.
• Do not put foreign objects on
the power cable.
• Do not operate the unit
outside the temperature
range stated in the user’s
manual.
• Do not operate the unit
in aggressive or explosive
environments.