6
KSB
TECHNICAL DATA
Vents KSB 100 S M U1 R K1
Insulation
_ - PU foam insulation.
K1 - mineral wool insulation.
Connection to power mains
_ - equipped with a terminal box.
R - equipped with a power cord with IEC C14 plug.
R1 - equipped with a power cord with a wall socket plug
(depending on the country of intended use).
Temperature and speed controller availability
U – speed controller with electronic thermostat and temperature sensor
integrated into the air duct. Equipped with power cord and IEC C14 electric plug.
Temperature-based operation logic.
Un – speed controller with electronic thermostat and external temperature sensor
fixed on 4 m cable. Equipped with power cord and IEC C14 electric plug.
Temperature-based operation logic.
U1 – speed controller with electronic thermostat and temperature sensor
integrated into the air duct. Equipped with power cord and IEC C14 electric plug.
Timer-based operation logic.
U1n – speed controller with electronic thermostat and external temperature
sensor fixed on 4 m cable. Equipped with power cord and IEC C14 electric plug.
Timer-based operation logic.
Anti-vibration mounts
_ - no anti-vibration mounts.
M - motor installed on the rubber anti-vibration mounts.
Motor power
_ - medium-powered motor.
S - high-powered motor.
Spigot connecting diameter [mm]
Product name
Trade mark
The fan is designed for operation in an enclosed area at ambient temperatures from -25°C up to +55°C at
relative humidity of up to 80 at +25°C.
Hazardous parts access and water ingress protection ratings is IP X4.
The fan is rated as a class I electric appliance.
The overall and connecting dimensions, external view, technical data are shown in fig. 1 and in table 1
and 2.
The fan design undergoes continuous improvement. Therefore, some models may slightly differ from the
ones described herein.
DESIGNATION KEY
V51EN-04.indd 6
23.10.2015 9:57:25