background image

15

www.ventilation-system.com

CERTIFICATE OF ACCEPTANCE

Unit Type

Duct redundancy fan unit in a sound-insulated casing

Model
Serial Number
Manufacture Date

Quality Inspector’s

Stamp

SELLER INFORMATION

Seller

Seller’s Stamp

Address
Phone Number
E-mail
Purchase Date

This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are 
acknowledged and accepted.

Customer’s Signature

INSTALLATION CERTIFICATE

The _____________________________________ unit is installed pursuant to the requirements stated 
in the present user's manual.

Installation Stamp

Company name
Address
Phone Number
Installation

Technician’s Full Name
Installation Date:

Signature:

The unit has been installed in accordance with the provisions of all the applicable local and national construction, 
electrical and technical codes and standards. The unit operates normally as intended by the manufacturer.

Signature:

WARRANTY CARD

Unit Type

Duct redundancy fan unit in a sound-insulated casing

Seller’s Stamp

Model
Serial Number
Manufacture Date
Purchase Date
Warranty Period

Seller

Summary of Contents for DuoVent 150 EC

















Reviews: