background image

www.ventilation-system.com

8

VENTS 125 IFK

VENTS 125 IFT

VENTS 125 IFP

www.ventilation-system.com

8

The fan is manufactured at the factory of “Ventilation systems” PrJSC (hereinafter referred to as the manufacturer). 

The manufacturer hereby warrants normal operation of the unit for 60 months after the retail sale date provided the user's observance 

of the transportation, storage, mounting and operation regulations.

Should any malfunctions occur in the course of the fan operation through the manufacturer's fault during the guaranteed period of 

operation the user is entitled to elimination of faults by the manufacturer by means of warranty repair at the factory free of charge. 

The warranty repair means performing works specific to elimination of faults in the fan operation to ensure its intended use by the user 

within the warranty period.

The defects are eliminated by means of replacement or repair of the complete fan or a faulty part thereof. 

The warranty repair does not include:

• 

routine technical maintenance

• 

fan installation / dismantling

• 

fan setup

To benefit from warranty repair the user must provide the fan, the user's manual with the purchase date stamp and the payment 

document certifying the purchase. 

The fan model must comply with the one stated in the user's manual.

Contact the product seller for warranty service, repair or replacement.

The manufacturer's warranty does not apply to the following cases:

• 

User's failure to submit the fan with the entire delivery package as stated in the user's manual including submission with missing 

component parts previously dismounted by the user.

• 

Mismatch of the fan model and make with the respective details stated on the fan packing and in the user's manual.

• 

User's failure to ensure timely technical maintenance of the fan.

• 

External damage to the casing (excluding external modifications of the fan as required for its installation) and the internal 

components of the fan.

• 

Alteration of the fan design or engineering changes of the fan.

• 

Replacement and use of the assemblies, parts and components not approved by the manufacturer.

• 

Not intended use of the fan.

• 

User's violation of the fan control regulations.

• 

Fan connection to the power mains with a voltage different from the one stated in the user's manual or on the label attached to 

the fan casing.

• 

Fan breakdown due to voltage surges in the power mains.

• 

User's discretionary repair of the fan.

MANUFACTURER’S WARRANTY

FOLLOWING THE REGULATIONS STIPULATED HEREIN WILL ENSURE A LONG AND 

TROUBLE-FREE OPERATION OF THE UNIT. 

USERS' WARRANTY CLAIMS SHALL BE SUBJECT TO REVIEW ONLY  

UPON PRESENTATION OF THE UNIT, THE PAYMENT DOCUMENT AND THE USER'S MANUAL 

WITH THE PURCHASE DATE STAMP.

Summary of Contents for 125 IFK











Reviews: