manualshive.com logo in svg

Ventrac LX423, Operator'S Manual, Page: 45 / 49

Share
Download
Ventrac LX423 Operator'S Manual Download Page 45

PARTS

Illustrated Parts - 45

Use only original Ventrac 

replacement parts.

70.8025 12 Volt Actuator

REF. 

PART NO. 

DESCRIPTION 

QTY.

1   . . . . . . . . . 30.0226  . . . . . . . . . . . . . . . . . . . .CLAMP, WIRE MT ADH. 3/8 GRAY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

2   . . . . . . . . . 02.CP0306   . . . . . . . . . . . . . . . . .COTTER PIN, 3/32 X 3/4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

3   . . . . . . . . . 03.0610  . . . . . . . . . . . . . . . . . . . .CLEVIS PIN, 3/8 X 1 1/4 ZP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

4   . . . . . . . . . 70.8025  . . . . . . . . . . . . . . . . . . . .KIT, 12V ACTUATOR, HB/KX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

5   . . . . . . . . . 30.0135  . . . . . . . . . . . . . . . . . . . .CLAMP, LOOM 3/8 ROSEBUD MOUNT   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

6   . . . . . . . . . 32.0074  . . . . . . . . . . . . . . . . . . . .HARNESS, 12 V  ACTUATOR HB/KX  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

7   . . . . . . . . . 30.0218  . . . . . . . . . . . . . . . . . . . .PLUG, TRAILER 4-PIN MALE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

 

Summary of Contents for LX423


















































Reviews:

No comments