SERVICE
Service - 21
Storage
Preparing the Snow Blower for Storage
1. Clean the snow blower.
2.
Attention
To maintain the finish of the power unit and attach
-
ment, thoroughly wash the equipment to remove any
corrosive agents (e.g., salt). Failure to clean the equip-
ment may result in corrosion of (including but not lim-
ited to) steel, aluminum, and electrical components.
Inspect for loose or missing hardware, damaged
components, or signs of wear.
3. Inspect safety decals, Replace any safety decals
that are faded, illegible, or missing.
4.
Inspect hydraulic hoses and fittings to ensure
tight, leak free connections. Repair or replace
any damaged or worn components.
5. Inspect belts for signs of damage or wear and
replace as required.
6. Inspect cutting edge and skid shoes for wear
and service as required.
7. Service all lubrication points and inspect gearbox
oil level.
8. Wipe off all excess grease or oil.
Removing the Snow Blower from Storage
I
nspect, clean, and prepare snow blower for use
.