HM & HP SERIES FINISH MOWERS
All Ventrac finish mowers (HM, HP, LM) feature single
lever height adjustment, easy flip-up deck design, and
rear roller for maximum lawn striping. The HP offset
mower shifts the mowing deck 6.5” to the left for a
shorter cutting radius and increased reach for mowing
around ponds or ditches.
4000 SERIES
HM602
HM722
HP722
Width of cut
60”
72”
72”
Cutting height 1.125 - 4.75” 1.125 - 4.75” 1.125 - 4.75”
Length
52”
58”
58”
Weight
385 lbs.
450 lbs.
450 lbs.
4000 7000
series
LM SERIES FINISH MOWERS
3000 SERIES
LM440
LM520
LM600
Width of cut
44”
52”
60”
Cutting height
1.5 - 3.75” 1.5 - 3.75”
1.5 - 3.75”
Length
45”
45”
58”
Weight
220 lbs.
273 lbs.
310 lbs.
3000
series
Easy height adjustment.
POWER RAKE
KP540
The Power Rake pulverizes, levels, grades and prepares
seed beds with 72 replaceable carbide tips. The
rotor is both driven and angled hydraulically.
Rotation can be changed from the
operator seat.
Overall height
34”
Overall width
62”
Overall length
82”
Rotor width
54”
Height adjustment
.125” increments
Height adjustment range
3.5”
Weight
536 lbs.
4000 7000
series
SLIP SCOOPS
Ventrac Slip Scoops are a
must-have attachment allowing
you to dig, level,
and move a variety
of materials.
HE300
HE480
Overall width
36”
52.5”
Working width
30”
48”
Height
15”
16”
Length
34”
34”
Weight
111 lbs.
175 lbs.
Capacity
3.6 f
3
6 f
3
3000 4000 7000
series
SNOW BLOWER
KX522
With a serrated auger, the KX and LX snow blowers
cut into light or hard-packed snow with ease. Chute is
rotated hydraulically left or right 220º on the KX and
180º on the LX.
Optional:
A 12V actuator allows the operator to change
the height of throw from the operator seat. A deep snow
auger is also optional on the KX522.
Width
52”
Height
56.5”
Depth
43.75”
Cutting height
26.5”
Cutting width
48”
Blowing distance
Up to 40’
Chute rotation
220º
Weight
475 lbs.
4000 7000
series
SNOW BLOWER
LX420
Width (cutting & overall)
42”
Height
52.5”
Length
43”
Throwing distance
Up to 40’
Chute rotation
180º
Weight
374 lbs.
3000
series
STUMP GRINDER
KC180
The KC180 Stump Grinder features 18 replaceable
carbide cutting teeth for large or small stump removal.
Standard front mounted mirror allows the operator to
see the stump easily while being fully protected from
debris.
Overall height
19”
Overall width
25”
Overall length
35”
Cutterhead width
3.5”
Overall cutterhead diameter
18”
Cutterhead speed
900 rpm*
Cutting depth below ground level
6”
Weight
171 lbs.
*Engine speed 3600 rpm
STUMP GRINDER
LC150
The LC150 Stump Grinder features 12 replaceable
carbide cutting teeth. An
adjustable blade hydraulically
lowers for use as a depth,
jackstand and to fill in
stump holes.
Overall height
19.5”
Overall width
21”
Overall length
40”
Cutterhead width
3.5”
Rotor tip speed
2,475 ft/min.*
Rotor rpm
620 rpm*
Cutting depth below ground level
6”
Weight
200 lbs.
*Engine speed 3200 rpm
SOD CUTTER
EC240
The Sod Cutter cuts a 24”
wide strip of sod at a user-
adjustable depth.
Cutting width
24”
Height
11.5”
Length
23.5”
Cutting Depth
0 to 2.5”
Weight
41 lbs.
4000
series
Standard mirror on KC180
TERRA RAKES
The Terra Rake is designed to perform a variety of
landscaping jobs. Features include: Hydraulic angling
and gauge wheels that can be mounted front, rear or
removed.
Optional:
Hydraulic height adjustment
link (shown), 10” wing extensions.
KR502
KR702
Overall width
52”
70”
Overall width w/extensions
72”
90”
Height
29.5”
29.5”
Length
52”
52”
Weight
242 lbs.
325 lbs.
3000 4000 7000
series
TILLER
KL480
The Ventrac Tiller is designed for easy preparation
of gardens and yards. This power-driven front-end
attachment allows the operator to easily monitor the
tiller’s performance. Skid shoe adjustments facilitate
cutting depth. Twenty-four high carbon
tines are durable and are
sequentially spaced to
maximize performance.
Overall width
53”
Working width
48”
Length
41”
Height
22”
Weight
345 lbs.
4000
series
TOUGH CUT MOWER
HQ680
The Ventrac Tough Cut Mower is designed for mowing
high grass, thick weeds, and heavy brush. Three heavy-
duty blades counter-rotate to cut and drop materials
evenly without windrowing. Tilt-up deck provides easy
access to the blades.
Optional:
Adjustable Swivel
wheels for a more controlled
height of cut.
Working width
68”
Cutting heights
3”, 3.625”, 4.25”
Length
45”
Height
15”
Weight
354 lbs.
4000 7000
series
TRENCHER
KY400
The Ventrac Trencher is capable of trenching up to 40
inches deep with a 5.5 inch-wide cut. Depth indicator
allows operator to gauge depth of cut from the operator
seat. Standard features include: Self-adjusting crumb
scraper and combo
terminator/cup chain with
replaceable carbide teeth.
Overall height
27”
Overall width
40”
Overall length
74.5”
Trenching width
5.5”
Trenching depth
40”
Weight
493 lbs.
4000 7000
series
TURBINE BLOWER
ET200
The Ventrac Turbine Blower’s front nozzle
hydraulically rotates 360º continuously
on a vertical plane. The front
guard protects the nozzle
while doubling as a deflector
for blowing forward.
Length
69”
Width
27”
Height
34”
Weight
256 lbs.
MPH out of nozzle
175 mph*
MPH out front of deflector
110mph*
Volume
10,000 cfm*
*Engine speed 3650 rpm
V-BLADE
KV550
The V-Blade is ideal for sidewalk snow
removal. Both wings can be independently
angled hydraulically forward or
back for greater control.
Optional:
Wing extensions,
top deflection flap,
and
polyurethane
cutting edge.
Length
31”
Width straight
55”
Width in forward “V”
48.5”
Width in backward “V”
48”
Height
21”
Weight
240 lbs.
Wing angle
30º each
3000 4000 7000
series
VERSA-LOADER
KH500
Discover the versatility and ease of the Ventrac
Versa-Loader (shown with standard bucket). Drive up
and attach in minutes
without tools or
heavy lifting. Once
connected, choose
the
standard
bucket or six other optional
attachments which also feature
Ventrac’s Minute Mount system
to get the job done.
Overall height on tractor
67”
Overall width
41.5”
Overall length w/standard bucket
75”
Overall length - tractor, loader & std. bucket
111”
Width of standard bucket
48”
Capacity of standard bucket (struck)
5 f
3
Weight w/o tools
508 lbs.
Lift capacity including tool
500 lbs.
Lift height (at pivot points)
77”
Oil tank capacity
6 gal.
Gallon/min. @ 3600 rpm
9.5 gpm
4000
series
(Loader is not compatible with the Cab)
MULCH BUCKET
9 cu. ft.
POST HOLE DIGGER
Fast drive motor
BOOM LIFT
TINE FORKS
TREE AUGER
Slow drive motor
PALLET FORKS
LOADER ATTACHMENTS
3000
series
4000 7000
series
4000 7000
series
