OPERATIONAL CONTROLS
Operation - 19
O
PERATIONAL
C
ONTROL
L
OCATIONS
The images on the previous page match with ref-
erence letters as shown below to help identify the
locations of operational controls for this power unit.
A - PTO Switch
B - Ignition Key Switch
C - Throttle
D - Glow Plug Indicator Light*
E - Tachometer/Hour Meter
F - Volt Gauge
G - Engine Coolant Temperature Gauge
H - Engine Oil Pressure Warning Light
I - Seat Belt Light
J - Light Switch
K - 12 Volt Switch (On/Off)**
L - 12 Volt Switch (Momentary On/Off/On)**
M - Engine Coolant High Temperature Alarm
N - Choke***
O - Selector Lever/Parking Brake
P - Belt Tension Lever
Q - Front Hitch Latch Lever
R - Front Hitch Lock
S - Seat Slide Adjustment Lever
T - High/Low Range Shift Handle
U - Weight Transfer
V - Fuel Shut-off Valve
W - Fuel Primer Bulb Pump*
X - Primary S.D.L.A. Control
Y - Secondary S.D.L.A. Control
Z - Foot Pedal**
AA - 12 Volt Rear Outlet & 4-Pin Socket**
BB - 3pt Hitch Control Handle**
CC - Left Rear Auxiliary Hydraulics Handle**
DD - Right Rear Auxiliary Hydraulics Handle**
EE - Auxiliary Hydraulic Quick Couplers
FF - 12 Volt 4-Pin Socket**
GG - Electric PTO Remote (5-Pin Socket)**
HH - Seat Latch (See page 18)
II - Seat Prop (See page 18)
JJ - Seat Lock Lever** (See page 18)
* Diesel Models
** Optional Equipment
*** Gasoline Models
P
OWER
T
AKE
O
FF
(PTO) S
WITCH
(A)
Depressing the top of the PTO switch engages the
electric clutch to provide power to the front attach-
ment. Depressing the bottom part of the switch will
disengage the clutch and apply the clutch brake to
stop the attachment. Note: The PTO will shut off
automatically if the operator leaves the power unit
seat. To restart,
fi
rst return to the seat, then disen-
gage and re-engage the PTO switch.
I
GNITION
K
EY
S
WITCH
(B)
1
2
3
1. Off or Stop Position - All 12 volt power going
through the key switch is off.
2. On or Run Position - Engine run position.
3. Start - When key is turned to the start position,
starter will engage.
T
HROTTLE
(C)
Moving the lever forward increases the engine
Revolutions Per Minute (RPM). Moving it back slows
the engine to an idle.
G
LOW
P
LUG
I
NDICATOR
L
IGHT
(D)
Indicates activation of glow plugs for preheating the
engine (diesel models only). The glow plugs activate
when the key is turned to the on position. When the
glow plug light turns off, the engine is ready to start.
The glow plugs and glow plug light are activated
when the key switch is in the start position, and
remain activated for 15-20 seconds after start up.
T
ACHOMETER
& H
OUR
M
ETER
(E)
When the engine is running, the engine RPM and
engine run time in hours is displayed.
V
OLT
G
AUGE
(F)
Displays the voltage level of the charging system.
E
NGINE
C
OOLANT
T
EMPERATURE
G
AUGE
(G)
Displays the temperature of the engine cooling system.
