SECTION B
SAFETY
VPI
VENTRAC 3000
B-1
Before Operating:
Read and understand this manual before operating the Ventrac 3000 machine. Study the
operating section and take time to get familiar with all controls and their functions.
Always
use proper safety precautions. Observe all safety decals.
Only experienced and mature personnel should operate equipment. No minors!
Inexperienced operators should be trained by experienced or qualified instructors.
Check engine fluid levels before starting.
Check brake/park function before operating and adjust or service as needed.
Inspect machine before operating. Be sure shields and guards are in good condition and
securely in place. Be sure hardware is tight. Repair or replace parts that are missing,
badly worn or damaged. Check that wheel nuts are tight several times during the first
100 hours of operation and after any wheel change.
This symbol identifies potential
health and safety hazards.
It marks safety precautions!!
Never Allow Riders:
Allow only the operator on the machine. Riders have no designated or secure place to sit.
Riders
also
obstruct the operator’s view.
Use Caution Around Children:
Never assume that children will remain where you saw them last...they are attracted to
motion and noise; stay alert to their presence and movement.
Before you reverse the machine, look behind you. Always look in the direction of travel.
When approached by others, stop the PTO and engage the park brake.
Safe Transport:
When driving on public roads, use a Slow Moving Vehicle sign. Flashing lights may be
advisable or required. Check and abide by local traffic laws.
Use extra caution when crossing roadways or operating near traffic.
Operate only during daylight or with good artificial light.