background image

WARNING– IMPORTANT NOTICE 

ADAS Feature  

The ADAS (Advanced Driver Assistance System) is an image
and software based feature embedded by the processor
manufacturer which is NOT Ventra.

As with all technologies, the ADAS feature has limitations and
may

not

detect

variations

in

vehicle

operation

and

environment.

Do NOT rely on the ADAS feature as an alternative to proper
operation of the vehicle. The feature is NEVER a substitution
for attentive driving at ALL TIMES.

Failure to focus on attentive driving may lead to accidents
which result in serious injury or death

Windshield Mounted Device Legal Notice

Please check and comply with ALL local, state and federal laws and or
regulations regarding windshield mounted devices.

Some state laws

prohibit drivers from using suction mounts on their windshield when
operating motor vehicles. Other state laws allow the suction mount to
be mounted to be located only in specific locations on the windshield.
Numerous states have enacted restrictions against placing objects on
the windshield in locations that obstruct the driver’s vision.

IT IS THE USER’S RESPONSBILITY TO MOUNT VENTRA EQUIPMENT IN
COMPLIANCE WITH ALL PPLICABLE LAWS AND ORDINCANCE.

Audio and Video Recording Legal Notice

Certain local, state and federal laws may prohibit recording of audio and 
or video in vehicles or public area, or without knowledge and or consent, 
please check and comply with ALL local, state and federal laws and 
regulations.

Built-In Shock Sensor

The built-in shock sensor may not recognize slight shock or
minor collision as an event. Different sensitivity levels may
be adjusted to match the level of sensitivity.

regulations.

Certain local, state and federal laws may require signage or display that 
indicate recording of audio and or video in vehicles or public area.  
Please check and comply with ALL local, state and federal laws and 
regulations.

IT IS THE USER’S RESPONSBILITY TO USE VENTRA EQUIPMENT IN 
COMPLIANCE WITH ALL PPLICABLE LAWS AND ORDINCANCE.

Use of this product other than its intended purpose is strictly prohibited.

Ventra Technology, Inc. does not assume any responsibility for any 
fines, violation, penalties or damages that may be incurred as a result of 
the use of the product.

Ventra Technology, Inc. is not responsible for any direct, indirect, 
incidental or consequential damages, arising out of use, misuse or 
inability to use of our products.

Summary of Contents for VDR-100














Reviews: