Screw
Loosen screws at the side of the center of blades, push the blade into the axle. Tighten the screws.
5.
Insert wire and safety wire through the downrod set. Fit one end of the downrod, with no ball
attached, to the top portion of the “U” tube. Put the washer through the downrod screw. Then
put the washer and spring washer through the downrod screw at the other end. Then tighten
hex nut firmly and securely.
Screw
Downrod Screw
Flat Washer
Hex Nut
Washer
Spring Washer
4.
Put the downrod through the canopy opening, as shown in the diagram.
Ball
Canopy
Downrod
3.
