VENTILAIRSEC VMI PUREVENT, Installation And Maintenance Manual

Page: 41 / 84

41
6.1.2 LED colour indications
The VMI® PUREVENT VISION'R appliance and the control unit have an indicator that changes colour
according to the operational status. If the colour changes from BLUE or flashes, refer to the table
below:
LED colour Information Remedy
Flashing blue The control unit batteries are flat. Change the batteries.
Yellow The filter is clogged. Change the filter.
Red The machine has detected a fault. Check the error code shown on
the control unit.
Contact the technical
department.
For any other problems, contact the technical department.
7 SPARE PARTS
Repair Description Ref. No.
Motor kit
Motor plug-in
unit
Preheating kit
Heater plug-in
unit
Electronic card kit EL 225
Fuse F1: type T250V12.5A
8 WARRANTY
8.1 General warranty terms and conditions
See the general terms and conditions of sale.
The system must be installed by a qualified professional technician using best practices and
complying with current standards and the stipulations in our instruction manuals. The system must
be used normally and serviced regularly by a specialist.
8.2 Warranty period
The VMI® PUREVENT VISION'R system and its control unit carries a 5-year warranty for parts and
labour (in our workshops).
All of the equipment (sensor, box) carries a 2-year warranty for parts and labour (in our workshops).
The warranty covering our products runs from the date of commissioning of the same, proven by the
provision of a warranty document.
8.3 Exclusion conditions
Any defect in the installation associated with failure to follow the manufacturer's recommendations,
failure to comply with any applicable standards and current legislation or with lack of servicing, will
be excluded from this warranty.