www.terra-wave.com
1-800-851-4965
Assembly Instructions
Compact Wall Mount
Figure 4
Figure 5
Step 2.2 (Aruba or other T bar mounted AP) – Fasten the AP clip onto the built in T-Bar
Step 3 –Clamps can be installed by removing the ½” trade size conduit knock outs if required
Step 4 – Place the enclosure on the wall where it is to be installed. The enclosure can be mounted directly to a junction
box or use the key holes to mount to any wall. Make sure to leave a minimum of 10 1/2“ from the bottom of the enclosure
to the ceiling so the door can be opened/closed.
Proper screws and wall anchors are the responsibility of the installer.
Step 5 – Run the data and power cables into the enclosure and attach to the AP
Step 6 – Attach AP to enclosure
Step 7 – Close lid until it snaps shut. Installation is now complete.
