PAGE 4
OVERVIEW
1. Front Grille
2. Grille Ring
3. Blade Cap
4. Fan Blade
5. Rear Grille Nut
6. Rear Grille
7. Motor Shaft
8. Motor
9.
3x Wall Screws (ST4X25MM)
10. Hook
11.
3x Wall Plugs
12. Grille Locking Screw (and Nut)
13. Tilt Adjustable Head
1. Remove the Rear Grille Nut [5]
from the motor shaft [7].
2. Insert the Rear Grille [6] into the
Motor [8] and match 3 rods on the
front side of the motor to 3 holes
of the Rear Grille [6], and fasten
the Rear Grille [6] tightly by turning
the Rear Grille Nut [5] clockwise.
3. Insert the Fan Blade [4] to the
motor shaft [7] and ensure
the pin enters the fan blade
slot and tighten the fan blade
using the Blade Cap [3] turning
anticlockwise.
4. Fix the Front Grille [1] into the slot
of the Grille Ring [2], and plug the
both parts to the upright position
on the Rear Grille [6], then secure
them together using the Grille Ring.
5. Tighten the Grille Locking Nut and
Screw [12] to fix the two grilles
together securely.
ASSEMBLING YOUR FAN
