Twistlock Canopy
FINISHING THE INSTALLATION
• Connect fan to the receiver (can be done before or after sliding receiver into place).
A.
For fan models without light, plug cable marked ‘motor’ into remote control box.
See Fig 7.2
B.
For fan models with light, plug cable marked ‘motor’ and ‘LED’ into remote control box.
See Fig 7.1
•
Slide receiver into position in the hanging bracket making sure the AC input connecter on the
receiver is aligned with the AC port on the receiver. Refer Fig 7.1 on page 8
Fig 7.1
Fig 7.2
• Slide the canopy upwards into position over the
mounting bracket then turn counter clockwise to
twist lock into position. Ensure all 4 tabs on the
mount bracket are located correctly into the slots
on the canopy. Canopy should be sitting approx.
-3mm off the ceiling.
• Ensure all wires are tucked neatly
into canopy taking care not
to cause damage.
Fig. 8
Twistlock Canopy
Twist Counter
Clockwise to lock
Twist
Clockwise
to unlock
6
