Venta LP60 Ultra Purifier, User Manual

Page: 20 / 60

15 GB
1 Display
2 On/off switch
3 Fragrance/filter compartment
4 Fragrance holder
5 Pre-filter
6 Filter
7 Fragrance/filter compartment
8 Fragrance holder
9 Pre-filter
10 Filter
11 Cable compartment
12 Remote control
01 06
PUTTING INTO OPERATION
OVERVIEW
01 Unpack the appliance and set it up. Open the fragrance/filter compartment
3+7 , remove the pre-filter 5+9 , remove the VENTAcel filter 6+10 and open them.
02 Re-insert the VENTAcel filter 6+10 and pre-filter 5+9 .
03 Close the fragrance/filter compartment 3+7 .
04 Inserting the fragrance: Open the fragrance/filter compartment 3 or 7 .
Twist open the fragrance cap and insert it into the fragrance holder 8 .
Insert up to three fragrances into the fragrance holder 4+8 . Close the
fragrance/filter compartment 3/7 .
05 The display 1 can be adjusted to three positions.
06 The power cable can be adjusted to the desired length by winding it up in
the cable compartment 11
Attention! Make sure that the appliance is switched off and the
power plug is disconnected.
Attention! The coupling of the mains cable must be plugged firmly into the
device!
Please remove the protective foil for
battery and remote control.
Connect the power plug and switch on the ap-
pliance at the on/off switch 2 or with the remote
control 12.
Set fan stage
ON/OFF