Installation and Wiring Instructions for the VA100
Fan.
IMPORTANT:
READ THESE INSTRUCTIONS
BEFORE COMMENCING THE
INSTALLATION
DO NOT install this product in areas where the following may be present or occur:
•
Excessive oil or a grease laden atmosphere.
•
Corrosive or flammable gases, liquids or vapours.
•
Ambient temperatures higher than 40°C or less than –5°C.
•
Possible obstructions which would hinder the access or removal of the Fan.
SAFETY AND GUIDANCE NOTES
A.
All wiring to be in accordance with the current I.E.E.
Regulations, or the appropriate standards of your country and
MUST
be installed by a suitably qualified person.
B.
The fan should be provided with a local isolator switch capable
of disconnecting all poles, having a contact separation of at
least 3mm.
C.
Ensure that the mains supply (Voltage, Frequency, and Phase)
complies with the rating label.
D.
The fan should only be used in conjunction with the
appropriate Vent-Axia products.
E.
It is recommended that the connection to the fan connector
terminals is made with flexible cable.
F.
When the fan is used to remove air from a room containing a
fuel-burning appliance, ensure that the air replacement is
adequate for both the fan and the fuel-burning appliance.
G.
The fan should not be used where it is liable to be subject to
direct water spray for prolonged periods of time.
H.
Where ducted fans are used to handle moisture-laden air, a
condensation trap should be fitted. Horizontal ducts should be
arranged to slope slightly downwards away from the fan.
I.
This appliance is not intended for use by young children or
infirm persons without supervision.
J.
Young children should be supervised to ensure that they do
not play with the appliance.