7
TWIN SPIGOT OPTION
(PIV twin spigot kit Ref:- 449071)
Ensure that the adjustable diffuser supplied with
the kit is installed nearer to the PoziDry Pro unit
than the diffuser supplied with the unit (Fig.7). This
allows both flows to be balanced.
Not to be used with FD models unless the
diffuser supplied with the kit is replaced with
diffuser part 475664.
Ducting fitment
Ensure the ducting is securely fixed to the diffuser and fan (or
heater if applicable) via the provided worm drive clips. (Fig 8)
Heater Unit:
The fan/heater unit must not be located directly below a socket.
AIR FILTER FOAM SEALS
•
Please ensure the filter foam seals (x6) are fitted to
the spigot ends before fixing the filters. (Fig.10/11)
•
Line up the foam seals with the edge of the spigots,
making sure not to cover spigot clips as shown.
(Fig.11)
•
Then fit filters over foam, on to the spigot ends.
(Fig.11)
Fig. 10.
Fig. 7.
Fig. 8
:
Apply worm drive clips provided
in positions shown
