VENOM ProPowerHD Commercial Series, Operating Manual

Page: 9 / 16

venompower.com
0609
5
venompower.com
4. Press the CURRENT button to choose the appropriate working current 5A / 10A / 15A
/ 20A / 25A.
5. Press the MODE button to select the storage mode.
6. To select between LiPo (4.2V/cell) and LiHV (4.35V/cell) press the CURRENT and MODE
buttons simultaneously for 4 seconds.
7. Press and hold the START/STOP button for 2 seconds to initiate the storage charge. An
audible tone will sound and the LED channel indicator will glow RED upon initiation.
8. The storage charge process is complete when the LED channel indicator glows GREEN.
NOTE - Pressing the START/STOP button during an active storage will
terminate the process.
NOTE - Charging a LiPo battery using the LiHV setting can cause permanent damage
to the battery and even cause a fire.
2S/3S RADIO BATTERY CHARGE OPERATION
The 2S and 3S JST-XH charge ports located at the right side of the Pro Power HD are
provided to charge a single LiPo (4.20V/cell) batteries with a capacity of 5000mAh or less.
1. Connect a single 2S or 3S battery using the JST-XH balance connection from the battery.
2. Upon connection the charge process will start automatically and the LED indicator above
the 2S & 3S charge ports will glows RED.
3. The charge process is complete when the LED indicator glows GREEN.
NOTE - Using the 2S and 3S charge ports simultaneously will cause permanent
damage to the charger.
LiPo AND LiHV MODE SELECTION
To select between the LiPo and LiHV settings press and hold the MODE and CURRENT
buttons on the desired channel for 4 seconds. An audible alert will sound as the setting is
changed and the LCD channel display will read either LiPo 4.20 or LiHV 4.35.
The Venom Pro Power HD is configurable to balance charge standard Lithium Polymer (LiPo)
batteries as well as High Voltage Lithium Polymer (LiHV) batteries.
• LiPo mode is provided for lithium batteries having a nominal per cell voltage of 3.7V and
a maximum per cell voltage of 4.2V
• LiHV mode is provided for lithium batteries having a nominal per cell voltage of 3.8V and
a maximum per cell voltage of 4.35V