- 9 -
9. LIGHT BULBS
This range hood requires two UL approved halogen bulbs (JC type, 12 V, 20 W).
To replace bulbs:
1. Gently squeeze both light ring tabs (
A
) and lift out ring (
B
) from light assembly.
2. Remove light cover from light assembly. A piece of tape can be used to help handling light cover.
3. Replace bulb with JC type, 12 V, 20 W Max, G-4 base halogen bulb.
4. Reinstall the light bulb cover with the light rim by gently squeeze both light ring tabs (
A
) and
insert ring (
B
) in light assembly until secure.
Make sure power is switched off at service panel before carrying out any operation on the hood.
In order to prevent the risk of personal injury, the halogen lamps must be cooled down before removing them.
CAUTION
Do not touch replacement bulb with bare hands!
HD0302
A
B
HD0302
A
B
HD0303
WARNING
!
WARNING
!
