8. GREASE FILTERS
-7-
9. LIGHT BULBS
10.OPERATION
This range hood requires two UL approved halogen bulbs
(Type JC, 12 V, 20 W Maximum, G-4 Base).
To change bulbs:
1.
Gently push the rim upward and turn counterclockwise to disengage
the light bulb cover.
2.
Replace with Type JC, 12V, 20 W Maximum, G-4 Base halogen
bulb.
3.
Replace the light bulb cover by pushing the rim upward and rotating
the light bulb cover clockwise.
WARNING
Always switch off the electrical supply before carrying out
any operation on the appliance.
!
HD0257
WARNING
In order to prevent the risk of personal injury, the halogen
lamps must be cooled down before removing them.
CAUTION
Do not touch replacement bulb with bare hands!
!
L
IGHT BULB COVER
1.
To remove the grease filters, pull down on the metal latch tab and
tilt each filter downward to remove.
2.
To install the grease filters, align rear filter tabs with slots in the
hood. Pull down the metal latch tab, push each filter into position
and release. Make sure filters are securely engaged after
installation.
HD0256
Lamp
Power
Speed
HC004
8
Timer
1
1) Time/Delay push button
3) Blower push button
2) Lighting push button
4) ON/OFF push button
2
3
4
The hood is operated using the push buttons located on the front panel.
