Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory
installed) from both studs and set aside.
If need be, remove current
glass panel retaining nuts from
both studs. Discard glass panel
and nuts.
Insert new glass panel studs in
appropriate hood holes.
While holding glass panel,
pre-tighten previously removed
nuts by hand. Ensure glass
panel is centered.
Then, using a 3/8" socket, tighten
nuts completely.
HD0561
G
LASS
PANEL
STUD
N
UT
Reinstall electrical compartment cover and filters.
- 7 -
I
F
THE
RANGE
HOOD
IS
NOT
INSTALLED
YET
,
REFER
TO
STEP
7
OF
THE
HOOD
INSTALLATION
GUIDE
.
I
F
THE
RANGE
HOOD
IS
ALREADY
INSTALLED
,
FOLLOW
THESE
STEPS
:
HO0249
Remove filters by pushing them
towards the back (opposite control side)
of the hood and tilting them down. Set the
filters aside.
Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory
installed) from both studs and set aside.
IB700, IC700
AND
IC700ES S
ERIES
(
CONT
’
D
)
IS700 S
ERIES
