Carefully remove the new glass panel from its packaging. Remove new glass panel nuts (factory
installed) from both studs and set aside.
- 3 -
If need be, remove current glass panel
retaining nuts from both studs. Discard
glass panel and nuts.
Insert new glass panel studs in hood
front holes.
While holding glass panel, pre-tighten
previously removed nuts by hand.
Ensure glass panel is flush with top of
hood and centered from side-to-side.
Then, using a 3/8" socket, tighten nuts
completely.
HD0440
G
LASS
P
ANEL
S
TUD
N
UT
Insert bottom panel in the back of the hood and reconnect each light assembly electrical
harness to its light connector.
Secure bottom panel to the hood, using the 10 previously removed screws.
Reinstall baffle filters.
I
F
THE
RANGE
HOOD
IS
NOT
INSTALLED
YET
,
REFER
TO
STEP
4
OF
THE
HOOD
INSTALLATION
GUIDE
.
I
F
THE
RANGE
HOOD
IS
ALREADY
INSTALLED
,
FOLLOW
THESE
STEPS
:
HO0247
Remove filters by pushing them
towards the back of the hood and tilting
them down. Set the filters aside.
F
OR
30”
WIDE
HOODS
:
Remove the
7 screws
(
A only
)
retaining the bottom panel, and set
aside.
F
OR
36”
WIDE
HOODS
:
Remove the
8 screws
(
A and B
)
retaining the bottom panel and set
aside.
HO0246
A
B
Carefully remove the glass panel from its packaging. Remove new glass panel nuts (factory
installed) from both studs and set aside.
C700 S
ERIES
(
CONT
’
D
)
IU600ES S
ERIES
