
13
Clearance
Training
Do not cut a joist or stud unless it is absolutely necessary to do so. If you need to cut a joist or stud, you must build a support
framework. Supplied hardware can secure the hood to most walls and ceilings. However, you should ask a qualified technician to
check the strength of materials depending on the type of wall or ceiling. Before cutting, make sure there is enough clearance in the
ceiling or wall for the outlet pass. You can determine for yourself how high you install the hood above the stove. Over the hood near
the stove, it is more effective to capture cooking odours, grease and smoke.
CAUTION: INSTALLATION FOR COOKING WITH GAS: INSTALL THE HOOD SO THAT THE DISTANCE BETWEEN THE LOWER EDGE OF
THE HOOD AND THE HOB IS OF 30 "(76.2 CM). FOR ELECTRIC RANGES:. DISTANCE BETWEEN THE BOTTOM EDGE OF THE HOOD
AND COOKING AREA should not be LESS THAN 24 "(61 CM) AND UPPER 30" (76.2 CM). HOUSEHOLD USE. READ THE
INSTRUCTIONS MANUAL FOR SPECIFIC APPLICATIONS.
So check the height of your ceiling and the maximum height of the hood before choosing your range hood.
Clearance
Summary of Contents for VT-ANG30
