①
Installation of the Blind…
First, insert the tension dial into the tongue of tension
dial bracket.
②
Second, press the end plug and insert the end plug
end into the hole of bracket of the other side.
③
①
②
③
2
Blind Installation and Removal
Installation
continued…
Blind Installation Tips…
After blind is installed into blind brackets, use a level to check if the fabrics roll is horizontal; if not,
please adjust the position of blind brackets to keep the fabrics roll level.
The blind needs to be level.
The gap on end plug end needs
to be about 4.5mm.
4.5mm
How to install your
#65101-40159
Cordless
(Roller Blinds with No top treatment)
Difficulty:
2
①
②
The lock pin in the blind bracket
must be slide downward into the
end plug to prevent the blind
from falling.
Align tension dial of
the blind with the
tongue of the
tension dial bracket.
①
②
③
Removal of the Blind…
Use a tool to push the lock pin on end plug bracket upward.
Use tool to draw back the end plug from bracket.
Finally remove blind from mounting bracket.
Finally slide the lock pin in the blind bracket downward into the end plug to prevent the
blind from falling.
