Instructions for the installer, maintenance
technician and final user
43
© SandenVendo Europe SpA
ICON
FUNCTION
DESCRIPTION
Normal operation
Start up
ON
OFF
BLINK
CLOCK
ON if at least one timed defrost
has been set. At start-up,
comes ON for a few seconds to
indicate that the Real Time
Clock is fitted.
If at least 1
timed defrost
event has been
set
No timed defrost
event set
Alarm clock
ON if
real-time
clock
present
LIGHT
Flashes if the anti-sweat heater
function is active, ON when the
auxiliary output (1 and/or 2)
selected as LIGHT is activated
(in firmware version 3.6 it does
not _ ash in anti-sweat heater
mode and comes on when the
dead band output is active).
Light auxiliary
output
on(version 3.6
dead band
auxiliary output
active)
Light auxiliary
output off
Anti-sweat heater
function
active(version 3.6
does not flash in
anti-sweat heater
mode)
SERVICE
Flashes in the event of
malfunctions, for example
E2PROM errors or probe faults.
No malfunction
Malfunction (e.g.
E2PROM error or
probe fault).
Contact service
HACCP
ON if the HACCP function is
enabled. Flashes when there
are new HACCP alarms stored
(HA and/or HF alarm shown on
the display).
HACCP
function
enabled
HACCP function
not enabled
HACCP alarm
saved (HA and/or
HF)
CONTINUOUS
CYCLE
ON when the CONTINUOUS
CYCLE function is activated.
Flashes if the activation of the
function is prevented due to
external disabling or
procedures in progress (E.g.:
minimum compressor OFF
time).
CONTINUOUS
CYCLE
operation
activated
CONTINUOUS
CYCLE function
not activated
CONTINUOUS
CYCLE operation
requested
DISPLAY
Shows temperature in range -
50 to +150°C. The temperature
is displayed with resolution to
the tenths between
–
19.9 and +
19.9 °C. The display of the
tenths can be disabled by
setting a parameter.
