PART 3 - Technical manual
36
Height adjustment
Always adjust the height of the VENDLET in accordance with the instructions on page
31-32
and the height of the mattress.
Use the positioning bolt on the backside of the mounting bracket to adjust the height
of the VENDLET. Press in the red button and subsequently pull out on the black part.
Now move the actuator fitting up or down to the desired position. Use the scale on
the backside or the side of the actuator fitting when choosing position. Let go of the
positioning bolt and make sure the bolt locks into position. The lock is in place when
the red button comes out.
Always ensure that the positioning bolt is in place and locked by pulling outward and
by pressing downward on the actuator fitting. Place all 4 actuator fittings at the same
height!
Adjustment of width of mounting brackets
Use up to 3 10 mm spacers if necessary to pull the mounting bracket away from the
bed frame, cf. the “Dimensional side rail requirement” description on page 31-32.
Mount the spacers on the mounting bracket with the provided button head screws
before attaching the mounting bracket to the bed.
One spacer
Two spacers and one top plate
Three spacers and one top
plate
Spacers are delivered in sets of four for which you need one bolt set.
The bolt set contains the following items:
4 6 x 6
mm button head
For 1 spacer
4 6 x 16 mm button head
For 2 spacers
4 6 x 26 mm button head
For 3 spacers
