PART 2 - User manual
25
Changing the turning sheet on an occupied
bed
1. Position the client on his/her side and
then move him/her to the centre of
the bed.
2. Remove the old turning sheet from the
bar facing the back of the client and
fold the sheet in layers with a width of
approx. 15 cm. Place it behind the back
of the client.
3. Attach the new turning sheet to the
bar and press or button to roll
the new turning sheet onto the bar.
Allow approx. half of the new
turning sheet to roll onto the bar and
stop when the red line on the sheet is
at the centre of the mattress. Fold the
remaining part of the new turning
sheet in layers of 15 cm and place it
under the turning sheet being
replaced.
4. Move the client to a supine position on
top of the folded new and old
turning sheets, and then on to the
opposite side by activating the bar
with the old turning sheet.
5. Remove the old turning sheet and
attach the replacement sheet to the
bar.
Fold the old turning sheet behind the back of
the client
Place the new turning sheet under the turning
sheet being replaced
Remove the old turning sheet
Attach the new turning sheet to the
opposite bar
Watch instruction videos on
our webpage vendlet.com
or scan the QR-code.
