24
Injector Outputs
Setting the injectors like this will work fine, it's not important which injector fires when except for
emissions. You can set the injectors to firing order, but it is generally recommended to wire up the
injectors to the cylinder firing order. For instance, Injector 1 goes to the first cylinder that fires. Injector
two goes to the second cylinder that fires. It is recommended to return and fine tune the injector order
after you have the engine running.
Secondary Outputs
Fuel Pump
Configured in the Outputs menu under the Fan / Water Pump / Fuel Pump item. Set the time to run the
pump on power-up to prime the fuel system and also the time to shut off the pump after the engine
looses the trigger (stalls for instance). Usually these are set to 1.5 to 2.0 seconds.
