22
If you have a coil on plug or coil near plug coil setup, you can still run wastespark by enabling the Dual
Output Mode. With this setting, each ignition entry will be two pins. You must make sure they are on
opposing cylinders in the firing order.
Index engine
Tools required: Timing light
With injectors still disconnected, strobe the crank pulley with the timing light on each cylinder following
the firing order to make sure each cylinder is firing where it should be. It is helpful to use a marker or
paint pen to mark the pulley where each cylinder should fire with a different color. Then you can easily
change cylinders and crank to make sure the cylinders are firing at the proper time.
