English
- 9 -
CHRONOS Chronothermostat User Manual
INSTALLATION
•
The chronothermostats of Chronos series are designed for wall-mountig .
Alternatively they can be installed to cover three-module in built box.
• The chronothermostat must be installed at a height at about 1.5 m above the floor,
away from direct sunlight, away from doors, windows, heat sources, locations with
excess or total lack of ventilation.
Connect the wires to the terminal
blocks of the base, as shown in the
“wiring diagrams”
.
Fix the base on the wall using the
screws supplied.
For battery power supply models
only: insert the batteries into the
battery compartment on the back
of the chronothermostat, respecting
the polarity
Attach the chronothermostat to the
base, at first mating teeth on the
higher side.
1
2
1
Attention: it’s not possible to make no programming or modification of the set
parameters until the device is not correctly installed on wall-mounted base
