VEMCO – VR100 Receiver Operating Manual – Page 53
5.6 SPECIFICATIONS
Product name:
VR100 Ultrasonic Telemetry & Tracking Receiver
Frequency Range:
12 to 200 kHz
Operating Temperature:
-15°C to +40°C. Battery life will be reduced below 0°C.
Ingress Protection Rating:
IPX5; see section 3.1 for details
Battery Life:
Approximately 12 hours when operating between 10°C and 40 °C
with backlight off, less with backlight on.
AC Power Supply:
(battery charger)
100-240V; 50/60Hz; 0.80A max
Indoor use, altitude up to 2,000 m., maximum relative humidity is
80%, mains supply voltage fluctuations up to 10% of the nominal
voltage, overvoltage category II, pollution degree 2.
DC Power Supply:
10 - 15VDC; 3A max
Physical Dimensions:
34 cm x 32 cm (with handle extended) x 15 cm
Physical Weight:
VR100-200:
6.5 kg
VR100-100:
5.2 kg
GPS Accuracy:
VR100-200:
Horizontal: < 5 meters (16 feet), 90% typical
*
(GPS only)
< 4 meters (13 feet), 90% typical
*
(with WAAS, EGNOS
or MSAS)
VR100-100:
Horizontal: < 9 meters (30 feet), 90% typical
*
GPS only (does not support augmentation such as WAAS, EGNOS
or MSAS)
VR100 firmware 3.0.3 or later required
* Subject to accuracy degradation under the United States Department of Defense-imposed
Selective Availability Program.
WAAS = Wide Area Augmentation System; EGNOS=European Geostationary Navigation
Overlay Service; MSAS=Multi-functional Satellite Augmentation System
5.7 CLEANING INSTRUCTIONS
Clean VR100 with a damp cloth and mild detergent.
Do not use solvents. Do not use abrasive cleaners. Do not allow oils, resins, paints, or similar gummy
materials to enter the case vent – these can clog the vent and prevent it from operating properly, possibly
creating a safety hazard.
