background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

AMIRIX Systems Inc. 

Warranty and Disclaimer

 

WARRANTY 

AMIRIX Systems Inc., doing business under its trade name VEMCO, provides a one (1) year warranty period for the Product from date of shipment.  

 

VEMCO warrants that on the date of shipment all Products manufactured by VEMCO are free from defects in material and workmanship under normal use and service. This warranty 

applies to the components necessary for equipment upgrades, i.e. the VR1/VR2 to VR2W upgrade. With respect to transmitter products, while VEMCO is able to predict battery life with 

some certainty, VEMCO cannot guarantee that these Products will remain functional while submerged for extended periods of time. This warranty does not apply to any equipment, 

materials or design supplied by Buyer or a third party; re-battery services provided by VEMCO; Products for which VEMCO has not received payment; problems that results from: external 

causes such as accident, abuse, misuse; servicing not authorized by VEMCO; usage not in accordance with Product instructions; failure to follow the Product instructions or failure to 

perform preventative maintenance; usage of accessories, parts or components not supplied by VEMCO. 

 

This warranty shall survive delivery only on the conditions and subject to the limitations set forth below. 

 

NOTICE PERIODS 

To receive a warranty remedy for a Product, Buyer must contact VEMCO’s Customer Support Department during the warranty period to receive the Return Material Authorization (“RMA”) 

instructions. Each defective Product returned for warranty remedy must be shipped at the Buyer’s expense according to the RMA instructions and must include reasonable proof that the 

claimed defect is due to a matter embraced within the warranty set forth above and that such defect did not result from any act or omission of Buyer, including but not limited to any failure 

to operate and maintain the Product in accordance with VEMCO’s applicable written instructions. 

 

REMEDY 

VEMCO’s liability, and the Buyer’s exclusive remedy under this warranty, as to a defect in material or workmanship, is limited to the repair of such defect in the accessory, equipment or 

part in which the defect appears or, at VEMCO’s option, to the replacement of such accessory, equipment or part with a similar item free from defect. As to any item repaired by VEMCO 

or furnished as a replacement by VEMCO, VEMCO’s liability and the Buyer’s exclusive remedy to the repair or replacement of such item for any further defect in material or workmanship, 

provided VEMCO receives written notice at Halifax, Nova Scotia, of such further defect from BUYER within ninety (90) days after the repaired or replaced item is shipped to BUYER and 

provided that BUYER returns same to VEMCO as provided under “Notice Periods”. 

 

RETURNED ITEMS 

All repairs, replacements and corrections described above shall be performed by VEMCO at its plant at Halifax, Nova Scotia, or at such other place as may be mutually agreeable, and 

with  reasonable  care  and  dispatch  in  order  that  the  Product,  accessory,  equipment  or  part  will  not  be  kept  out  of  service  longer  than  necessary.  Return  to  BUYER  of  a  repaired, 

replacement, or corrected accessory, equipment, part or Product shall be at VEMCO’s expense. Title to and risk of loss of the Product, accessory, equipment, or part returned to VEMCO 

pursuant hereto shall at all times remain with the BUYER, except that title to a returned accessory, equipment, part, or Product shall pass to VEMCO concurrently with shipment to 

BUYER of any item furnished by VEMCO to BUYER as a replacement therefore. VEMCO shall have only such responsibility for any Product, accessory, equipment, or part owned by the 

BUYER and in the possession of VEMCO as is chargeable by law to a bailee for hire, but shall not be chargeable for loss of use thereof. 

 

WEAR AND TEAR 

Normal wear and tear and the need for regular maintenance shall not constitute a defect under this warranty. 

 

DISCLAIMER AND RELEASE 

THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF VEMCO AND THE REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND IN SUBSTITUTION FOR, 

AND BUYER HEREBY WAIVES AND RENOUNCES, ALL OTHER WARRANTIES AND OBLIGATIONS OF VEMCO AND ANY ASSIGNEE OF VEMCO AND ALL RIGHTS, 

CLAIMS AND REMEDIES OF BUYER AGAINST VEMCO, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY NON-PERFORMANCE OR 

DEFECT IN THE PRODUCT OR IN ANY OTHER THING DELIVERED UNDER THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO: 

(A)

 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; 

(B)

 

ANY IMPLIED WARRANTY ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE; 

(C)

 

ANY  OBLIGATION,  LIABILITY,  CLAIM  OR  REMEDY  IN  TORT,  WHETHER  OR  NOT  ARISING  FROM  THE  NEGLIGENCE  OF  VEMCO  OR  ANY  ASSIGNEE  OF  VEMCO, 

ACTUAL OR IMPUTED;  

(D)

 

ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY FOR LOSS OF OR DAMAGE TO THE PRODUCT, FOR LOSS OF USE, REVENUE, OR PROFIT WITH RESPECT 

TO THE PRODUCT; OR FOR ANY OTHER DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES; AND 

(E)

 

VEMCO  MAKES  NO  REPRESENTATION  THAT  THE  PRODUCT  WILL  NOT  INFRINGE  ANY  PATENT  OR  OTHER  RIGHTS  OF  ANY  PERSON  AND  BUYER  AGREES  TO 

INDEMNIFY VEMCO AND HOLD VEMCO HARMLESS FROM ANY AND ALL CLAIMS AND LIABILITIES WITH RESPECT TO SAME TOGETHER WITH ANY CLAIMS AND 

LIABILITIES  WITH  RESPECT  TO  ANY  INFRINGEMENT  OF  ANY  PATENT  OR  OTHER  RIGHTS  OF  ANY  PERSON  ARISING  AS  A  RESULT  OF  BUYER'S  PRODUCTS, 

TECHNOLOGY, ACTIVITIES, OR OTHERWISE. 

 

LICENSE AGREEMENT 

VEMCO  grants  to  the  Buyer  a  limited,  personal  license,  with  no  right  to  sub-license,  to  use  the  Intellectual  Property  (“IP”)  and  Embedded  Software  in  the  manner  set  out  in  the 

Documentation. The Embedded Software and IP are not sold to Buyer. All property rights, including Intellectual Property Rights, remain with VEMCO. All rights related to the Embedded 

Software not expressly licensed to the Buyer are reserved to VEMCO. BUYER shall not permit any person other than BUYER and its employees to use or make use of the Embedded 

Software and/or IP. BUYER shall not, and shall not permit any third party to, modify, adapt, translate, reverse engineer, decompile, disassemble, or create derivative works based on the 

Embedded Software and/or IP. This license is assigned to the Product with which you have acquired the Embedded Software and/or IP. If the Product purchased is a Transmitter product, 

be advised that the license life is equal to the operational life. 
 

EXPORT 

Products and associated materials supplied or licensed hereunder may be subject to various export laws and regulations. It is the responsibility or BUYER to comply with such laws and 

regulations. 

 

NEGOTIATED AGREEMENT 

It is fully understood by the parties that the price of the Product and other mutual agreements of the parties set forth in this agreement were arrived at in consideration of this warranty, 

SPECIFICALLY INCLUDING THE WAIVER, RELEASE AND RENUNCIATION BY BUYER SET FORTH ABOVE (DISCLAIMER AND RELEASE). 

 

 

© (2012) AMIRIX Systems Inc. All rights reserved. The information contained herein includes information which 
is confidential and proprietary to AMIRIX Systems Inc. and may not be used or disclosed without prior written 
consent of AMIRIX Systems Inc. 

DOC-004536-13 

 

Summary of Contents for VR100
























































Reviews: