max 3 sec
1 sec
3
KLC 500
10 sec
1
VELUX
®
13
ENGLISH
V
A
S 4
5
4
3
6
0
-2
01
9
-0
2
1
The products connected can be
reset by removing the cover of the
control unit and pressing the
RESET button for at least
10 seconds.
The connected products will run
briefly back and forth in random
order to indicate that they are
ready for pairing.
Note:
Registration (
2
and
3
) must
now be completed within the next
10 minutes.
Setup of wall switch KLI 311/312/313 to operate electrical products
connected to VELUX INTEGRA
®
control unit KLC 500
If a non-functional wall switch must be replaced or if the wall switch cannot find certain products, the products can be
prepared for registration by resetting them manually.
Note:
Reset products cannot be operated until they have been registered in the wall switch again.
Important:
The wall switch type must match the relevant product(s).
2
2
Press PAIR button on the wall
switch for 1 second.
3
Press the STOP key and then the
DOWN key within 3 seconds.
The products can now be operated
with the wall switch.
