Velotric Thunder 1ST, Quick Start Manual

Page: 8 / 15

12 13
Step 7
Rear Light
Bike Assembly
Remove the bolt on the
rear light clamp and
mount the light to the
seat post.
1. Adjust the light angle
(perpendicular to the
ground) and tighten the
bolt.
2. Remove the film
spacer and press the
power button to turn
on the light.
3.
90°
Ground
Peel off the protective
layer from the 3M
adhesive. Position the
adaptor to the center
of your phone case.
1. Press down firmly on
the adaptor. The tape
will achieve maximum
adhesion after 24 hours.
2. Attach your phone to
the stem mount and
twist the phone 90
degrees clockwise to
secure the attachment.
3.
90°
Step 8
Phone Mount
Bike Assembly