Velodyne MiniVee, User Manual

Page: 7 / 20

R es toring Defaults
1
.
w w w . v e l o d y n e . c o m
MiniVee User’s Manual
Congr atulations
Congratulations on your purchase of a Velodyne subwoofer system. This system represents the
state-of-the-art in low frequency reproduction and will provide you with years of listening
pleasure when properly cared for. Read and follow this instruction manual to insure safe and
proper system connection and operation.
Caution!
Please observe the following precautions to insure safe and proper system operation.
Note: Do not leave unit in direct sunlight or use in high humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all
warnings on the equipment itself. There are no user serviceable parts inside. Please refer all
service questions to your authorized Velodyne dealer or service representative.
P r i o r t o I n s t a l l a t i o n
Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to
avoid injury. Please save the carton and all packaging materials for future use. Packing this unit
in any other carton may result in severe damage when shipping. Record the serial number in
the space provided on the warranty card for future reference.
Product Features and Controls
• A single driver consisting of either:
- 8” (6.5” piston diameter) driver with 2.5” high-temp voice coil and
204 ounce magnet structure or,
- 10” (8” piston diameter) driver with 3” high-temp voice coil and
346 ounce magnet structure
• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency Class D amplifier
• Adjustable (40 to 120 Hz) low-pass crossover (defeatable)
• Line-level (RCA) inputs and outputs
• LFE Input
• Speaker-level inputs with five way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0° or 180°)
• Multiple staggered low-pass crossovers; 12 dB/octave initial, 48 dB/octave ultimate
• Driver Displacement Control circuit prevents over excursion and amp clipping
• Blue power indicator LED
• High-excursion EPDM rubber surround
• Oversized spider for linearity at high excursion