Introductory
screen.
Remote Control Button Sequence Commands for TV-based Interface
Command
Button Sequence
Description
Go to
System Response
screen
1 – 2 – 3 – 4 – 5
On the
Introductory
screen
Self-EQ
3 – 2 – 1 or EQ
Initiate Self-EQ optimization. Be sure to connect the
microphone before engaging. After 28 sweeps,
the unit saves and resets.
Cancel Self-EQ and Auto-EQ
RESET
Stop and cancel a Self-EQ or Auto-EQ optimization
process.
Restore defaults
8 – 9 – 0
Restore defaults and reset the subwoofer.
Restore last saved volume
RESET
If volume is changed, restores last saved volume.
Display serial number
▲
-
▲
-
▲
-
▲
- SELECT
Shows the serial number of the unit at the top
of the screen.
Switch PAL/SECAM video
▼
-
▼
-
▼
-
▼
- RESET
The unit restarts in PAL/SECAM video mode.
Use 8 -9- 0 (Restore defaults) to return to
NTSC mode.
Go to the System Response Screen
To get to the
System Response
screen:
1. With the
Introductory
screen showing on the TV, press
1-2-3-4-5
on the remote. As you press these buttons, the numbers display on
the
Introductory
screen as shown in Figure 5.
Figure 5: introductory Screen
2. After pressing
5
, you see the
System Response
screen as shown in Figure 6.
[ 31 ]
TV SCREEN INTERFACE FOR OPTImIZATION
Digital Servo User’s Manual
