background image

Care Of Your Velodyne

This product combines both electronic devices and loudspeakers.
Care must be taken not to damage either unit. Please take every
precaution possible when installing and using the product so
damage does not occur.

● 

Do not allow objects to come in contact with the clear anodized

    aluminum cone, as the cone is very delicate.

● 

Use only damp cloth when cleaning either controller housing or

    speaker. No harsh detergents or chemicals that may damage
    thesurface.

● 

Never expose the Servo-Controller housing to moisture.

● 

DO NOT try to adjust the setup controls in control unit. Refer all

    adjustments to an authorized Velodyne dealer/installer.

● 

If any part of your Velodyne Servo-Controlled subwoofer or

   controller should require service, return unit to your authorized
   dealer. There are no user serviceable parts inside.

Congratulations!

Thank you for purchasing a Velodyne product. Your purchase of a
Velodyne servo-controlled subwoofer for the automobile shows a
desire to achieve the highest possible quality of sound reproduc-
tion. This product has been engineered and built to the highest
standards to provide you with years of listening pleasure.

The DF-series servo-controlled subwoofers represent a break-
through in car audio technology. By designing the speaker and
proprietary control circuitry from the ground up, we have reduced
distortion to an order of magnitude below that of the best speakers
currently available. After you listen, we think you'll agree. For the
lowest distortion speakers around, there is only one choice. Velo-
dyne, the bottom line in bass.

2

9

Warranty & Service Information

This product is constructed of the highest grade materials and
assembled under the strictest possible quality assurance condi-
tions.

Should a situation arise which leads you to believe the product is
malfunctioning, please return to your authorized Velodyne dealer
first.

Should the product require repair or service, your Velodyne dealer
is required to send the product in to Velodyne directly, we do not
authorize outside service stations to make repairs to this product.

If you have any additional questions concerning the specific war-
ranty coverage, please consult the supplied warranty & registration
card.

Any additional questions which are not covered in this manual
should be directed to either your authorized Velodyne dealer or
contact us directly  at Velodyne . . .

Velodyne Acoustics, Inc.

1070 Commercial St. Suite #101

San Jose, CA 95112

408.436.7270 voice

408.436.7276 fax

Summary of Contents for DF-10sc







Reviews: