background image

19

This VELLO product is warranted to the original purchaser to be free 
from defects in materials and workmanship under normal consumer use 
for a period of one (1) year from the original purchase date or thirty (30) 
days after replacement, whichever occurs later. The warranty provider’s 
responsibility with respect to this limited warranty shall be limited solely 
to repair or replacement, at the provider’s discretion, of any product that 
fails during normal use of this product in its intended manner and in its 
intended environment. Inoperability of the product or part(s) shall be 
determined by the warranty provider. If the product has been discontinued, 
the warranty provider reserves the right to replace it with a model of 
equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, 
accident, alteration, abuse, improper installation or maintenance. EXCEPT 
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER 
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, 
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This 
warranty provides you with specific legal rights, and you may also have 
additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service 
Department to obtain a return merchandise authorization (“RMA”) 
number, and return the defective product to Vello along with the RMA 
number and proof of purchase. Shipment of the defective product is at the 
purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call 
Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group. 
© 2020 Gradus Group LLC. All Rights Reserved.

ONE-YEAR LIMITED WARRANTY

Summary of Contents for shutterboss version ii





















Reviews: